Newsroom
All the data on this website is provided by HOREN unless otherwise stated.
*Full load: Only when the liquid density ≤ 1.35g/cm³.
*High reliability test: All tests are tested at HOREN’s standard labs in simulation of the conditions required by ISTA and ASTM.
*Traditional non-foldable IBC: Non-foldable plastic IBC tanks in general on the market with dimensions of 1200x1000x1145mm.
*Regular plastic foldable IBC: IBCs on the market under Asian and European standards and with dimensions of 1200x1000x1140mm and volume of around 1000L. Thus IBC OF330, with a volume of 1249L, is about 25% larger.
*Two-thirds: The volume of a folded IBC is approximately 1/3 of that when unfolded. So compared with a non-foldable container of the same size, 2/3 of the storage space is saved for return transport.
*Three-quarters: The volume of a folded IBC OF330 is approximately 1/4 of that when unfolded. So compared with a non-foldable container of the same size, 3/4 of the storage space is saved for return transport.
*Service life of up to 10 years: Measured in accordance with the limited conditions in HOREN’s standard labs.
*TE pin: Available upon request and purchase.
*Heater pad: Available upon request and purchase.
*7.6:1: The ratio of the volume of an erected KingKong RPC to that when folded is approximately 7.6:1.
*31%: Obtained upon measurement of multiple products under the same conditions of compression test in HOREN’s standard labs.
*No Crate Change: Goods stored in HOREN’s crates can be directly transported from farm or place of origin to market for display and sale, without the need to change to new crates.
*0.1%: In HOREN’s standard lab environment, 1000kg of 300,000-cP viscous liquid, after being discharging, leaves residues weighing <1kg.
*Hands-free: After RRS and liner are installed, no more manual operation is needed during the discharge process.
*Folding ratio 3:1: The ratio of the volume of an erected FLC KF975 to that when folded is approximately 3:1.
